SRD ILS 81/12 Labels & Compatibility

SRD Labels supplies industrial label media for SRD ILS 81/12 production workflows used in cabinet manufacturing, CNC and panel-processing environments.

Looking for an 80/20 printer? Check the machine nameplate before selecting labels. SRD also features the ILX 80/20 workflow, which should not be assumed to use the same media configuration as an ILS 81/12. Compare printer families or send us the exact model details.

Start with the installed configuration

Do not choose a label only from the printer family name. Confirm the exact machine designation and the media configuration installed on the line before ordering.

  • Print method: confirm whether the installed setup uses direct thermal media or thermal transfer media with ribbon.
  • Label face size and liner width
  • Roll core diameter
  • Winding direction
  • Maximum roll diameter
  • Sensor and media-path configuration

Available SRD label formats

SRD currently offers 3 × 3 and 4 × 2 industrial label products in direct-thermal and thermal-transfer constructions. The correct product depends on the complete roll and printer configuration.

Compare SRD blank label rolls
Label format Printing method Pack options
3 × 3 in 3x3 direct thermal labels — no ribbon 3,000 labels per roll; 12,000 per box of four
3 × 3 in 3x3 thermal transfer labels — ribbon required 3,000 labels per roll; 12,000 per box of four
4 × 2 in 4x2 direct thermal labels — no ribbon 3,000 labels per roll; 12,000 per box of four
4 × 2 in 4x2 thermal transfer labels — ribbon required 3,000 labels per roll; 12,000 per box of four

These are blank label rolls with a 3-inch core. Match your installed printer, full liner width, winding direction, roll diameter and sensors before ordering. For a legacy ILX 81/12, check the 4x2 media orientation requirements.

HOMAG and HOLZMA production workflows

HOMAG CNC equipment and HOLZMA panel saws are production systems in which label printing can be integrated into part-identification workflows. They are not printer models. Match the label to the actual printer or print engine installed in the line.

Need help confirming the roll?

Send SRD a clear photo of the printer nameplate and current roll, together with the label dimensions and core diameter. That information is more reliable than assuming compatibility from the model family alone.

View the printer compatibility guide or contact SRD Labels.

Shipping

Shipping rates are calculated at checkout. Qualifying in-stock orders placed before 4 PM EST ship the same day under SRD's current shipping policy.

Third-party manufacturer and equipment names are used for identification and workflow guidance. Compatibility should be confirmed for the specific installed configuration.

HOMAG CENTATEQ CON3 machine guides

SRD pre-labeling installations on the N-210, N-300, N-310, N-500, N-510, N-600 and N-700 in CON3 configuration may use either an SRD ILX or SRD ILS printer. Identify the printer on your installation before choosing media.

Browse HOMAG CNC Labels and all seven machine guides.