HOMAG CENTATEQ N-210 Labels & CON3 Printer Guide

HOMAG CNC Labels / CENTATEQ N-210

Label selection and machine information for HOMAG CENTATEQ N-210 owners using CON3 setups with SRD pre-labeling.

HOMAG CENTATEQ N-210 CNC machine
Machine image: HOMAG. Representative installation; equipment and generation may differ from your CON3 setup.

Entry into automated nesting

The CENTATEQ N-210 is HOMAG’s entry-level nesting platform for cutting and machining panel materials. HOMAG describes standalone and automated arrangements, with tooling options to suit different processing tasks. The current generation has a more compact installation footprint than its predecessor.

What this means for label selection

For an N-210 shop, use the machine designation to identify the production line, then check the pre-labeling station itself. A standalone machine and a CON3 installation should not be treated as the same labeling setup.

CON3 pre-labeling: SRD ILX or SRD ILS

SRD identifies this model in CON3 configuration with SRD pre-labeling as a supported production workflow. It may be equipped with either an SRD ILX or SRD ILS printer. Check the installed printer’s model plate before selecting labels; the CNC model alone does not identify the printer.

Choose the correct label roll

  1. Record the printer model and whether it uses direct thermal media or thermal transfer media with ribbon.
  2. Match label face dimensions, full liner width, core diameter, winding direction and maximum roll diameter to the existing setup.
  3. Confirm the applicator and sensor requirements. For legacy ILX 81/12 systems, check the media-width and orientation guidance, especially for 4 × 2 labels.

Compare 3 × 3 DTL, 3 × 3 TTL, 4 × 2 DTL and 4 × 2 TTL only after matching your configuration. SRD rolls contain 3,000 labels per roll; a box of four contains 12,000 labels.

Ask SRD to check your printer and roll. Send the printer nameplate and current roll details.

Machine documentation

Read the original HOMAG documentation for the N-210.

Machine overview based on manufacturer/distributor documentation. CON3 SRD ILX/ILS installation guidance supplied by SRD. Specifications vary by year and installed options. Manufacturer names identify equipment and do not imply endorsement of SRD Labels.