CNC Part Identification Labels for Cabinet Production

Part-identification labels help keep production information connected to a component as it moves through a cabinet-manufacturing workflow. The correct label depends on the printer, print method and roll configuration used on the line.

Where labels fit in the workflow

  1. Print: production data is printed at the labeling station or integrated print engine.
  2. Apply: the label is applied to the part at the appropriate point in production.
  3. Identify: operators can use printed information such as part numbers, production references or barcodes when those fields are part of the shop's process.
  4. Track through production: the labeled part can remain identifiable through CNC, panel-saw, sorting and assembly stages.

Match the media to the printer

Before ordering, confirm whether the printer uses direct thermal media or thermal transfer media with ribbon. Also confirm label dimensions, liner width, core diameter, winding direction, roll diameter and sensor setup.

Current SRD formats

Check printer compatibility or send SRD the machine and roll details for help narrowing the correct option.

More CNC labeling resources

For a step-by-step buying process, read our CNC and panel-saw label selection guide. If your existing roll does not have readable specifications, use our industrial label roll measurement checklist to record liner width, core, winding and media sensor details. Browse all articles in the SRD Knowledge Center.

HOMAG CENTATEQ CON3 machine guides

SRD pre-labeling installations on the N-210, N-300, N-310, N-500, N-510, N-600 and N-700 in CON3 configuration may use either an SRD ILX or SRD ILS printer. Identify the printer on your installation before choosing media.

Browse HOMAG CNC Labels and all seven machine guides.

Shop part-identification labels

Browse direct thermal label rolls, thermal transfer label rolls, or compare both print methods on the industrial labels overview.